G12W automations overhaul: fixes + Solcast night SOC optimization ...

🔴 BUG FIXES:
- Wyłącz 06:00: removed grid_charging=ON condition (same bug as 15:00 had).
  Now always resets to Battery First + restores max_charging_current=100A.
- Night charging: removed SOC<95 condition that caused both automations to
  skip when battery was full (programs stayed unchanged from previous night).

🟠 IMPROVEMENTS:
- Merged 'Bardzo pochmurnie' + 'Pochmurnie' (Pn-Czw) into single automation
  'Ustaw ładowanie nocne' with choose for Program 4 based on forecast.
  Eliminates 130 lines of duplicated code.

- Night target SOC now Solcast-based (not always 100%):
  target = min(100, max(40, (load_w*16 - pv_tomorrow_wh) / 143.36 + 10))
  Example: tomorrow 28 kWh PV, load 1500W → target = 40% (saves ~8 kWh grid)
  Example: tomorrow 2 kWh PV, load 2000W → target = 100%

- Sunday 'Niedziela' automation: same Solcast-based target + Program 4 choose.

- mode: single added to ALL 10 automations.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

G12W: Solcast-based charging optimization for 15:00-22:00 coverage ...

Old logic: check if instantaneous PV surplus > battery deficit (100% target).
Problem: moment of cloud = wrong decision; always aimed for 100% SOC.

New logic:
- Target SOC at 15:00 = what's needed to cover 15:00-22:00 consumption
  (expensive tariff) minus expected PV after 15:00, + 15% buffer
- Uses Solcast prognoza_na_nastepna_godzine * 1.8 to estimate PV in 13-15h window
- Uses Solcast pozostala_prognoza_na_dzis to estimate PV after 15:00
- Uses current load_power as average consumption proxy for 15-22h (7h)
- Grid charging current = exactly what's missing (not always 100A)
- program_4_soc = calculated target SOC (not always 100%)
- Co-15min optimization uses prognoza_na_biezaca_godzine + remaining window time

Result: charges battery to precisely what's needed for the day, not always 100%.
On sunny days: Battery First (no grid import). On cloudy days: minimal grid import.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Fix: restore battery_max_charging_current=100A at 15:00 unconditionally ...

Bug: '15:00 wyłącz ładowanie' automation had condition grid_charging=ON.
When PV was sufficient (Battery First, no grid import), that condition was
never met → max_charging_current stayed at limited value indefinitely.
Next morning, battery charged slowly from PV and excess went to grid.

Fix: Remove grid_charging condition from 15:00 trigger. Always restore
battery_max_charging_current=100A at end of cheap window, regardless of
whether grid charging was used.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Fix: apply 94% efficiency factor to charging current calculation ...

Inverter has ~6% conversion losses. Without this factor, battery was
charging at full PV surplus current causing ~176W grid import to cover losses.

New formula: surplus_a = ((pv * 0.94 - load) / vbat) | int
Result: grid = -107W (slight export) instead of +176W (import).

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Fix battery charging: limit max_charging_current to PV surplus ...

When PV can charge battery without grid (Battery First mode),
limit battery_max_charging_current = (PV - Load) / V_bat to prevent
battery from pulling excess power from grid.

Without this fix, battery charged at max 100A even when PV surplus
was only ~55A, resulting in ~500W grid import for battery charging.

Formula: max(5, min(100, (pv_w - load_w) / bat_voltage_v))
Applied in both g12w_wlacz_ladowanie_dzienne and g12w_pv_charging_optimization.
On grid-charge path: restore battery_max_charging_current to 100A.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

G12W: Smart afternoon charging - use grid only when PV can't charge battery ...

Replaces fixed-threshold logic with energy budget calculation:
- Formula: PV_surplus_W * remaining_hours >= battery_deficit_Wh
- Battery capacity: 14336 Wh (280Ah LFP at 51.2V nominal)

'Włącz ładowanie dzienne 13:00' (12:55 trigger):
- Calculates if PV surplus over full 2h window >= battery deficit
- YES → Battery First, no grid charging needed
- NO → Load First + Grid at 100A (use cheap G12W tariff)

'Optymalizacja PV ładowania dziennego' (every 15min, 13:00-15:00):
- Recalculates with actual remaining time in window
- Dynamically switches between Battery First / Grid as cloud cover changes
- Only triggers grid charging when SOC < 95% and PV genuinely can't finish the job

Example: PV=3358W, Load=1188W, SOC=99%, remaining=1.38h
  Surplus=2988 Wh >> Deficit=143 Wh → Battery First, grid import drops 3100W→324W

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

G12W: Ładowanie 13:00-15:00 zawsze w dni robocze ...

Usunięty warunek prognozy < 5 kWh dla dziennego ładowania.
Teraz automatyzacja uruchamia się zawsze Pn-Pt gdy SOC < 95%.

Add G12W battery automation, IBSystem MQTT integration, HA configs ...

Zmiany:
- ha-configs/151/: Kopia konfiguracji HA TEST
  - automations.yaml: Automatyzacje G12W ładowania baterii
  - configuration.yaml: Główna konfiguracja z dashboardami
  - dashboards/: Deye, Ogrzewanie, IBSystem, ID35

- ibsystem/: Integracja IBSystem z MQTT
  - ibsystem2mqtt_v5.py: Bridge IBSystem → MQTT
  - config.yaml: Konfiguracja połączeń
  - ibsystem2mqtt_watchdog.sh: Health check i auto-restart

- docs/: Dokumentacja
  - G12W_BATTERY_AUTOMATION.md: Opis taryfy i automatyzacji
  - IBSYSTEM_MQTT_INTEGRATION.md: Opis integracji MQTT

Kluczowe naprawy:
- Program 6 Deye: zmiana z 21:00 Disabled na 22:00 Grid
- IBSystem: setting.light.X zamiast output.do.X dla sterowania
- Dashboard ID35: prawidłowe entity IDs (ibsystem_rs0_id35_*)
- Watchdog dla ibsystem2mqtt (cron co minutę)